Compact Storage Shed

Wall height: 1.83m
Flat roof sheds – economical and great for tight spaces.
  • Great for tight spaces
  • Minimal roof angle that can be sloped at installation stage front to back or back to front
  • Supplied in 5 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Roof overhang from 65mm to 235mm
  • Various door options available
  • Increase wall height to 1.96m or 2.09m
  • Install yourself or we can do it for you
gm-compactstore-ss

ShedMaster Sheds

Wall height: 1.83m
Supplied with a zinc roof and strong cold formed roof beam.
  • Best shed if you need to go hard up against your fence as there is no overhang on the back
  • Supplied in 4 panels with much of the assembly already done
  • Roof is unassembled
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Supplied with a zinc roof and strong cold formed roof beam
  • Increase wall height to 1.96m or 2.09m
  • Install yourself or we can do it for you
shedmaster-ss

Skillion Roof Sheds

Front wall height: 1.96m
Rear wall height: 1.83m
Extra head room at the front to improve access and increase storage.
  • These sheds have a 130mm variation in wall height from front to back.
    • 1.83m and 1.96m (standard)
    • 1.96m and 2.09m (wall height upgrade)
    • These measurements can also be changed to flow the water in the opposite direction
  • Provides good water run off
  • Supplied in 4-5 panels with much of the assembly already done
  • Depending on the size the shed roof may be unassembled
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Install yourself or we can do it for you

Federation Sheds

Wall height: 1.83m
The charm of yesterday with the ease of tomorrow. Choose your colour trim in Tuscan Red, Cottage Green or Classic Cream.
  • 30 degree roof angle provides a huge roof space and would suit many older style houses
  • Comes standard with colour trim choices, Tuscan Red, Caulfield Green or Classic Cream
  • Supplied in 6 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Increase wall height to 1.96m or 2.09m
  • Other trim colours available at an extra cost, please enquire
  • Install yourself or we can install for you

The Retro/Corrugated Shed

Front wall height: 1.96m
Rear wall height: 1.83m
Exciting design slant on the traditional garden shed.
    • Skillion style roof
    • These sheds have a 130mm variation in wall height from front to back.
      • 1.83m and 1.96m
      • These measurements can also be changed to flow the water in the opposite direction
    • Provides good water run off
    • Supplied in 4-5 panels with much of the assembly already done
    • Depending on the size the shed roof may be unassembled
    • Comes with tech screws, gloves and instructions ready to install
    • Various door options available
    • 0.42 sheeting
    • Complete choice of colours as per BlueScope’s range
    • Install yourself or we can do it for you
  • Wall height upgrade to 2.09, at the front, 1.96m at the rear
    • Roof slope can be sloped to front if required

All of our sheds can be manufactured in corrugated sheeting. Please enquire.

retro-ss

Convenient Storage Sheds

Wall height: 1.83m
  • 10 degree roof pitch, the most popular within our range
  • Provides good water run off
  • Supplied in 6 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Wall height can be increased to 1.96m or 2.09m
  • Install yourself or we can do it for you

Maximum Storage

Wall height: 1.83m
Gable/truss roof for enthusiasts – larger sizes for the workshop with plenty of storage space.
  • Same as the Convenience Storage shed but simply longer than 3.76m
  • These larger sheds feature a roof truss, hat sections and fly brace for maximum strength to ensure your shed will stand the test of time
  • 10 degree roof which is the most popular within our range
  • Provides good water run off
  • Supplied in 10 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Wall height can be increased to 1.96m or 2.09m
  • Install yourself or we can do it for you

HD-Series Shed

Wall height: 2.09m
Steel frame gives extra strength for the ultimate heavy-duty storage centre.
  • Same as the Maximum Storage shed but with many options already included
    • Steel frame (50 x 50 posts and 2 x 38 x 25 horizontal rails)
    • 2.09m wall height
    • Security kit (additional door braces and keyed T-Bar door handle)
    • Colour coded gutters with 75mm pop
  • These larger sheds feature a roof truss, hat sections and fly brace for extra strength to ensure your shed will stand the test of time
  • 10 degree roof which is the most popular within our range
  • Provides good water run off
  • Supplied in 10 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Install yourself or we can do it for you

Steel frames and/or gutters can be added to any Garden Master shed

gm-hd-ss

The Cave

ALL NEW SUPER STRONG Heavy Duty Tool Shed
Great work space with the 18.5 roof pitch and 2.09 wall height

Same as the Tool Shed shed but with many options already included:

  • Steel frame (50 x 50 posts and 3 x 38 x 25 horizontal rails)
  • 2.09m wall height
  • Keyed T-Bar door handle
  • Colour coded trim to match the wall cladding
  • Gutter with Pops Front & Back
  • Frame kit with posts and 3 rails
  • Welded Framed Door
  • Extra Large Flashings all over
  • 18.5 degree roof pitch
  • Install yourself or we can do it for you
  • BlueScope Steel
  • Supplied in 6-10 pre-assembled panels (depending on size)
  • Customisable
cave5

The Tool Shed

The ultimate in small Tool Sheds
Great work space with the 18.5 roof pitch and 2.09 wall height
  • 18.5 degree roof pitch
  • 2.09m wall height
  • Keyed T-Bar door handle
  • Colour coded trim to match the wall cladding
  • Extra Large Flashings all over
  • BlueScope Steel
  • Supplied in 6-10 pre-assembled panels (depending on size)
  • Install yourself or we can do it for you
  • Customisable
cave4

Chemical Sheds

Standard wall height: 1.83m
A high quality economical solution to meet your chemical storage requirements.

Our chemical sheds meet Australian Standards with correct use.

Complete kits includes:

  • Gable roof shed in Zinc or Colour
  • Precast Bunded flooring made with reinforced concrete, inbuilt drain attachment fittings and precast anchor points
  • Rotating roof vent and two fixed wall vents for cross ventilation
  • All components for simple DIY installation, including pre-assembled shed panels.

Chemical Sign kits available:

  • Includes 7 metal signs, No Smoking, No Entry, Authorised Personnel Only, Dangerous when wet, Flammable Liquid 3, Toxic 6, Corrosive 8, Misc Dangerous Goods 4.

Safe and secure storage

Most responsible operators would be aware of the legal obligation to safely use dangerous substances when on the job, but what happens to the little bit left over? Where is the designated storage that is both safe and secure?

This surprisingly economical shed is a great investment in your health and safety. Installing a Bunded Chemical Shed will fulfil your legal obligations and help you protect your family, workers and/or your customers.

Government-accepted

Agsafe and SafeWork have indicated their acceptance in type of Bunded Chemical Shed. This ‘acceptance in type’ leaves clear responsibility on the end-user to competently assess the use of the shed for type, quantity and combination fo substances being stored, and to provide a suitable site with correctly utilised signage.

Easy to transport

Shed panels are flat packed and strapped to a palletised slab for easy forklift handling. Slab weight is 700kg. 3.02 x 2.27m shed is supplied with two bunded slabs. Pack size is 2.1m by either 3.1m or 2.3m (depending on shed size).

Easy to install

Pre-assembled panels are easily installed by bolting to the precast concrete floor for secure anchorage. Wall vents are factory fitted and roof vent simply attaches to a framed hole in the roof on site. Detailed instructions and fittings are supplied.

The end-user is responsible to complete the plumbing of the drains to the requirements of the site – no fittings external to the slab are supplied.

Flat Aviaries

Wall height: 1.83m

Doors

  • These are 1.2m high – ½ mesh and ½ sheeting to match dado under all mesh sections. There are two tube inserts in each side of the door to give effective bracing without obstructing viewing. All doors are fitted with a padbolt and an extra safety catch for use when inside the aviary.

Dividers

  • These can be used to divide an aviary into any number of compartments and the doors can be in the divider or outside walls to give required access. They normally match the end walls for sheet, mesh and dado.

Heavy duty parrot mesh available.

  • Supplied in 5 pre assembled panels
  • The following options are available:
    • Various combinations of steel and mesh to suit your personal requirements
    • Hinged hatch
    • Mesh in roof
    • Mesh to ground
    • Full height doors
    • Rotating feeders so you don’t have to enter the cage to feed
    • Coloured trim
  • Bird proofing is supplied with all aviaries and is used to seal the gap between the top of the wall and the sheeting
  • Install yourself or we can install for you
flat-aviary

Gable Aviaries

Wall height: 1.83m
  • 625mm steel skirt made from Bluescope steel sheeting, 0.4mm thick
  • Garden Master sources galvanised 12.5 x 12.5 x 1.2mm mesh. If you have a parrot our 25 x 25 x 2mm heavy-duty mesh may be what you need, ask our helpful staff when ordering.
  • Doors are 1.2m high and have a padbolt and extra latch for internal locking when in the enclosure.
  • Manufactured from Bluescope galvanised “J” Channel
  • Aviaries with length smaller than or equal to 3.76 will be supplied in 6 pre-assembled panels
  • Lengths greater than 3.76  will be supplied in 10 pre-assembled panels and 2 heavy duty ridge beams and a prefabricated welded truss.
  • Bird proofing is supplied with all aviaries and is used to seal the gap between the top of the wall and the sheeting.
  • Made in South Australia
  • We use steel rivets for the main frame and large flange aluminium rivets for the attachment of mesh
  • Assembly kits are supplied with class 4, 10 gauge tech screws, instructions and gloves.
  • Doors have square hollow section steel installed to provide additional strength.
  • Large format gable aviaries enables unrestricted flying ,giving your birds a happy and healthy environment.
  • Dividers available as per flat aviary description.
  • The following options are available:
    • Hinged hatch
    • Various combinations of steel and mesh to suit your personal requirements
    • Mesh in roof sections
    • Mesh to ground
    • Full height doors
    • Rotating feeders so you don’t have to enter the cage to feed.
    • Coloured trim
  • Install yourself or we can install for you
aviary-gable-main

Hexagonal Aviary

Popular style that complements any setting for attractive display of your birds or other pets. Picture on the right shows a 1.55m size with optional coloured trim and mesh.

Features

  • Hexagonal aviary is supplied in 6 pre-assembled panels and a two piece roof
  • 0.4mm thick Australian BlueScope Colorbond Steel
  • Mesh is galvanised 12.5 x 12.5 x 1.2
  • Wall height 1.83m
  • Supplied , with class 4, 10 gauge tech screws, instructions and gloves.
  • 1.2m door with square hollow section steel installed to provide additional strength for the hinges
  • Manufactured in Edwardstown
  • Install yourself or we can install for you
  • The following options are available:
    • Various combinations of steel and mesh to suit your personal requirements
    • Hinged hatch
    • Mesh to ground
    • Full height doors
    • Rotating feeders so you don’t have to enter the cage to feed
    • Coloured trim
gm-aviary-hexx
hex-size

Square Aviary

Door height: 1.2m, wall height: 1.58m, Floor size: 0.78m x 0.78m

Choose from two appealing aviary designs. Floor tray fits both styles and comes in zinc only.

  • Options include:
    • Hinged hatch
    • Coloured trim
    • Rotating feeders so you don’t have to enter the cage to feed
gm-aviary-box

Flight Aviary

Door height: 1.56m, wall height: 1.83m
Give your birds plenty of space to stretch their wings in our new Flight Aviary.

Mesh from top to bottom provides unrestricted view for both you and your animals.
Designed with a ledge along front for easy placement of perches. Simply rest your perch on the ledge and back wall of aviary – no need for fixings! Also, the 200mm high step deters animals from running out the door.

  • Dado can be added if required
  • Reverse options to suit your yard
  • Door is full height
  • Customizable
  • Install yourself or we can do it for you
  • The following options are available:
      • Various combinations of steel and mesh to suit your personal requirements
      • Hinged hatch
      • Mesh in roof
      • Mesh to ground
      • Full height doors
      • Rotating feeders so you don’t have to enter the cage to feed
      • Coloured trim
      • Heavy duty parrot mesh
flight-aviary-m

Flat Roof

  • BlueScope steel
  • Galvanised 12.5 x 12.5 x 1.2 thick wire
  • Galvanised “J” Channel and 0.4mm thick sheeting
  • Solid sheeted door
  • Wire panels have a 625mm sheet skirt for structural strength and protection from cats etc at ground level
  • Main structure is riveted with steel rivets with large flange aluminium rivets to attach the mesh
  • Supplied in 5 pre-assembled panels from our SA factory for easy assembly on site. (wire mesh fitted)
  • Square steel inserted provides a strong door
  • Roof can be sloped for water to flow forward or back during installation
  • Easy adapted for use as fowl houses, catteries or kennels etc.
  • Available in Zinc or Colorbond
  • Door position customisable
  • Various combinations of steel and mesh available

Options:

  • Internal and External Nesting Boxes
  • Dividers
  • Extra Doors
  • Hinged Hatch
chook-flatroof

Gable Roof

  • Available in Zinc or Colour with galvanised channel and trim.
  • Supplied in 6 pre-assembled panels (all wire mesh is fitted) from our SA factory for easy assembly on site.
  • Standard layout – wire in front panel only. This allows aviary to be positioned to protect the birds from prevailing wind.
  • Additional wire sections available.
  • Wire panels have a 625mm sheet skirt for structural strength and protection from cats etc at ground level.
  • Easy adapted for use as fowl houses, catteries, kennels etc.
  • Availability of the door in the gable end if required for the larger sizes.
  • Our SA made acerwall colour sheeting is 0.4mm thick
  • Heavy gauge ridge beam.
  • Dividers and extra doors available
  • Hinged hatch available
  • Internal or external nesting boxes available
  • Various combination of steel and mesh configurations available
  • Coloured trim/channel is an optional extra
  • Door position is customizable
chook-gableroof

Chook Palace

Pitched Roof

  • 30 degree pitch allows plenty of air movement, reducing the risk of overheating during the summer months.

Termite resistant

  • Steel construction keeps the coop mite-free, protecting your chickens and their home.

Adaptable

  • The Chook Palace is also suitable for housing racing pigeons with the addition of a gating system

Dual nesting areas

  • Includes two externally accessible nesting boxes. Water sits underneath the nesting shelf, keeping water clean and reducing the chance of contamination

Options available:

  • Hinged hatch
  • Various combinations of steel and mesh configurations
  • Timber floors
  • Coloured trim
  • Door position is customisable
  • Available in zinc or colorbond with galvanised trim/channel
chookpalace-m

A-Frame Aviary

Door height: 1.2m
  • A-Frame aviary is supplied in 4 pre-assembled panels, centre support internal hinged door to enable cleaning
  • 0.4mm thick Australian BlueScope Colorbond Steel (also available in zinc)
  • Mesh is galvanised 12.5 x 12.5 x 1.2
  • Supplied , with class 4, 10 gauge tech screws, instructions and gloves.
  • 1.2m door with square hollow section steel installed to provide additional strength for the hinges
  • Manufactured in Edwardstown
  • Install yourself
  • Handles at both ends to easily move around the yard.
gm-smallpetenclosure

Small Pet Enclosure

Wall height: 1.2m
Strong and hygienic design for small animals inlcuding cats, dogs, aviary birds, rabbits, guinea pigs, hens and other poultry.
  • Our SA made Acerwall colour sheeting is 0.4mm thick.
  • Supplied in 5 pre-assembled panels from our SA factory for easy assembly on site.
  • Compact size of the flat roof suits restricted areas and backyards where space is at a premium.
  • Roof can be sloped for water to flow forward or back during installation.
  • Unobtrusive style of the flat roof is ideal for situations where minimal visual impact is required.
  • Supplied with class 4, 10 gauge tech screws, instructions and gloves.
  • Doors have square hollow section steel installed to provide additional strength.
  • Customisable info

Options:

  • Fully customisable, add extra mesh sections or add more full sheet sections
  • Door position customisable
  • Reverse positions to suit your yard
  • Powder coated trim
  • Powder coated mesh
gm-smallpet-enclosure

Cat Runs

  • Green shadecloth bottom 
  • Mounting clips and pincers included
  • Some assembly will be required 
  • 25 x 25 Mesh Galvanised 
  • Easy to install 
  • Ground runners available
catruns-main

Shadehouses

Protect your plants from the elements!

Our horticulture-grade shade cloth has a 50% sunblock factor to provide a cool environment, while maintaining moisture and reducing weeds and insects. It is fade resistant, UV stabilised and reinforced at the edges to resist fraying and tearing.

Green 50% shadecloth is standard with every shadehouse, however other colours are also available. Please contact us if other colours or sunblock factors are required.

  • BlueScope steel
  • Flat roof shade houses supplies as 5 pre assembled panels
  • Gable roof shade houses up to 3.76m long are supplied as 6 pre – assembled panels, larger shade houses are supplied as 10 pre – assembled panels and a galvanised truss.
  • Doors have square hollow tube inserts to provide additional strength
  • Door position is customisable
  • Custom sizes available
  • Colour trim available
  • Tiered plant stands to suit available
  • Made in our South Australian factory
gm-shadehouse

Hothouses

An attractive and economic alternative to the traditional glasshouse

Maintains the correct environment for your plants. Natural Solarweave allows light but very little air transfer. 2 blade louvre vent each end allows control of atmosphere.

  • BlueScope
  • Flat roof Hot houses supplies as 5 pre assembled panels
  • Gable roof Hot houses up to 3.76m long are supplied as 6 pre – assembled panels, larger shade houses are supplied as 10 pre – assembled panels and a galvanised truss.
  • Doors have square hollow tube inserts to provide additional strength
  • Door position is customisable
  • Custom sizes available
  • Colour trim available
  • Tiered plant stands to suit available
  • Made in our South Australian factory
gm-hothouse

Tiered Plant Stands

Heavy duty galvanised, suitable for plant display

Sturdy construction, made in Australia from quality materials. 20mm x 20mm galvanised SHS, 70mm x 50mm x 4mm thick galvanised mesh, 300mm deep shelves in either 1.44m or 2.19m lengths.

Custom sizes available. Available in single, 2 tier and 3 tier.

gm-tiered-stand

Boxed Shed2Go™ Gable Roof

Simple, quick and easy storage with a gable style
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • Double doors in all sizes except the 2.27m x 2.27m
  • BlueScope steel
  • The same Garden Master quality, but assemble it yourself
    and save!
  • All doors in the front panel.
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.

Boxed Shed2Go™ Economaster

Economical and compact storage solution
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • The same Garden Master quality but assemble it yourself and save!
  • BlueScope steel
  • Flat roof can be sloped to front or back during assembly
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.

Boxed Shed2Go™ Federation

The charm of yesteryear with the ease of tomorrow
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • Traditional garden master quality but assemble yourself and save!
  • BlueScope steel
  • Heritage roof has 30 degree pitch, overhanging eaves, barges and finials
  • Choose your colour trim, Tuscan red, Caulfield green or classic cream, other colours available at an extra cost.
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.
  • 2.27m size has a single door
  • 3.02m size has a double door

Boxed Shed2Go™ HD Quickstore

Gable roof with heavy duty steel frame for extra strength
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • BlueScope steel
  • 50mm x 50mm posts and 38mm x 25mm purlins – galvanised inside and out
  • Concealed brackets give a clean finish, making lining easy.
  • Doors include welded braces and keyed door lock
  • Truss supplied with 4.5 and 6m lengths
  • Double doors on front panel
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.

Boxed Shed2Go™ Pet Shelters

Aviaries, Chicken Enclosure and Animal Enclosure
All Shed2Go™ products are unassembled and boxed ready for shipping

Strong and hygienic design for small animals including cats, dogs, aviary birds, rabbits, hens and other poultry.

Flat Roof

Features:

  • Traditional Garden Master quality, but assemble it yourself
    and save!
  • Galvanised mesh 12.5mm x 12.5mm x 1.2mm thick
  • Doors can be installed either end
  • Roof can be sloped to front or back
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt
  • Supplied in boxed form, easy to transport and
    assemble.

Options (available on some models)

  • Heavy duty galvanised mesh (25mm x 25mm x 2mm) to suit parrots

Gable Roof

Features:

  • Traditional Garden Master quality, but assemble it yourself
    and save!
  • Galvanised mesh 12.5mm x 12.5mm x 1.2mm thick
  • Doors can be installed either end
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt
  • Supplied in boxed form, easy to transport and
    assemble.

Options (available on some models)

  • Heavy duty galvanised mesh (25mm x 25mm x 2mm) to suit parrots

Garden Master also produces quality verandas in Australian Colorbond Steel

Extend your home’s outdoor living area and enjoy Australia’s fantastic climate with a Garden Master Veranda. Add a practical and stylish veranda to your home to achieve the alfresco lifestyle we all enjoy whilst adding value to your home. Our Steel verandas are designed to withstand the Australian climate and won’t rot or warp as can happen with timber. Call us today to discuss your requirements

Gable Verandah

Protect your plants from the elements!

Coming Soon

Flat Roof Verandah

An attractive and economic alternative to the traditional verandah

Coming Soon

flatroofverandah
Sheds

Compact Storage Shed

Wall height: 1.83m
Flat roof sheds – economical and great for tight spaces.
  • Great for tight spaces
  • Minimal roof angle that can be sloped at installation stage front to back or back to front
  • Supplied in 5 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Roof overhang from 65mm to 235mm
  • Various door options available
  • Increase wall height to 1.96m or 2.09m
  • Install yourself or we can do it for you
gm-compactstore-ss

ShedMaster Sheds

Wall height: 1.83m
Supplied with a zinc roof and strong cold formed roof beam.
  • Best shed if you need to go hard up against your fence as there is no overhang on the back
  • Supplied in 4 panels with much of the assembly already done
  • Roof is unassembled
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Supplied with a zinc roof and strong cold formed roof beam
  • Increase wall height to 1.96m or 2.09m
  • Install yourself or we can do it for you
shedmaster-ss

Skillion Roof Sheds

Front wall height: 1.96m
Rear wall height: 1.83m
Extra head room at the front to improve access and increase storage.
  • These sheds have a 130mm variation in wall height from front to back.
    • 1.83m and 1.96m (standard)
    • 1.96m and 2.09m (wall height upgrade)
    • These measurements can also be changed to flow the water in the opposite direction
  • Provides good water run off
  • Supplied in 4-5 panels with much of the assembly already done
  • Depending on the size the shed roof may be unassembled
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Install yourself or we can do it for you

Federation Sheds

Wall height: 1.83m
The charm of yesterday with the ease of tomorrow. Choose your colour trim in Tuscan Red, Cottage Green or Classic Cream.
  • 30 degree roof angle provides a huge roof space and would suit many older style houses
  • Comes standard with colour trim choices, Tuscan Red, Caulfield Green or Classic Cream
  • Supplied in 6 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Increase wall height to 1.96m or 2.09m
  • Other trim colours available at an extra cost, please enquire
  • Install yourself or we can install for you

The Retro/Corrugated Shed

Front wall height: 1.96m
Rear wall height: 1.83m
Exciting design slant on the traditional garden shed.
    • Skillion style roof
    • These sheds have a 130mm variation in wall height from front to back.
      • 1.83m and 1.96m
      • These measurements can also be changed to flow the water in the opposite direction
    • Provides good water run off
    • Supplied in 4-5 panels with much of the assembly already done
    • Depending on the size the shed roof may be unassembled
    • Comes with tech screws, gloves and instructions ready to install
    • Various door options available
    • 0.42 sheeting
    • Complete choice of colours as per BlueScope’s range
    • Install yourself or we can do it for you
  • Wall height upgrade to 2.09, at the front, 1.96m at the rear
    • Roof slope can be sloped to front if required

All of our sheds can be manufactured in corrugated sheeting. Please enquire.

retro-ss

Convenient Storage Sheds

Wall height: 1.83m
  • 10 degree roof pitch, the most popular within our range
  • Provides good water run off
  • Supplied in 6 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Wall height can be increased to 1.96m or 2.09m
  • Install yourself or we can do it for you

Maximum Storage

Wall height: 1.83m
Gable/truss roof for enthusiasts – larger sizes for the workshop with plenty of storage space.
  • Same as the Convenience Storage shed but simply longer than 3.76m
  • These larger sheds feature a roof truss, hat sections and fly brace for maximum strength to ensure your shed will stand the test of time
  • 10 degree roof which is the most popular within our range
  • Provides good water run off
  • Supplied in 10 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Wall height can be increased to 1.96m or 2.09m
  • Install yourself or we can do it for you

HD-Series Shed

Wall height: 2.09m
Steel frame gives extra strength for the ultimate heavy-duty storage centre.
  • Same as the Maximum Storage shed but with many options already included
    • Steel frame (50 x 50 posts and 2 x 38 x 25 horizontal rails)
    • 2.09m wall height
    • Security kit (additional door braces and keyed T-Bar door handle)
    • Colour coded gutters with 75mm pop
  • These larger sheds feature a roof truss, hat sections and fly brace for extra strength to ensure your shed will stand the test of time
  • 10 degree roof which is the most popular within our range
  • Provides good water run off
  • Supplied in 10 panels with much of the assembly already done
  • Comes with tech screws, gloves and instructions ready to install
  • Various door options available
  • Install yourself or we can do it for you

Steel frames and/or gutters can be added to any Garden Master shed

gm-hd-ss

The Cave

ALL NEW SUPER STRONG Heavy Duty Tool Shed
Great work space with the 18.5 roof pitch and 2.09 wall height

Same as the Tool Shed shed but with many options already included:

  • Steel frame (50 x 50 posts and 3 x 38 x 25 horizontal rails)
  • 2.09m wall height
  • Keyed T-Bar door handle
  • Colour coded trim to match the wall cladding
  • Gutter with Pops Front & Back
  • Frame kit with posts and 3 rails
  • Welded Framed Door
  • Extra Large Flashings all over
  • 18.5 degree roof pitch
  • Install yourself or we can do it for you
  • BlueScope Steel
  • Supplied in 6-10 pre-assembled panels (depending on size)
  • Customisable
cave5

The Tool Shed

The ultimate in small Tool Sheds
Great work space with the 18.5 roof pitch and 2.09 wall height
  • 18.5 degree roof pitch
  • 2.09m wall height
  • Keyed T-Bar door handle
  • Colour coded trim to match the wall cladding
  • Extra Large Flashings all over
  • BlueScope Steel
  • Supplied in 6-10 pre-assembled panels (depending on size)
  • Install yourself or we can do it for you
  • Customisable
cave4
Chemical Shed

Chemical Sheds

Standard wall height: 1.83m
A high quality economical solution to meet your chemical storage requirements.

Our chemical sheds meet Australian Standards with correct use.

Complete kits includes:

  • Gable roof shed in Zinc or Colour
  • Precast Bunded flooring made with reinforced concrete, inbuilt drain attachment fittings and precast anchor points
  • Rotating roof vent and two fixed wall vents for cross ventilation
  • All components for simple DIY installation, including pre-assembled shed panels.

Chemical Sign kits available:

  • Includes 7 metal signs, No Smoking, No Entry, Authorised Personnel Only, Dangerous when wet, Flammable Liquid 3, Toxic 6, Corrosive 8, Misc Dangerous Goods 4.

Safe and secure storage

Most responsible operators would be aware of the legal obligation to safely use dangerous substances when on the job, but what happens to the little bit left over? Where is the designated storage that is both safe and secure?

This surprisingly economical shed is a great investment in your health and safety. Installing a Bunded Chemical Shed will fulfil your legal obligations and help you protect your family, workers and/or your customers.

Government-accepted

Agsafe and SafeWork have indicated their acceptance in type of Bunded Chemical Shed. This ‘acceptance in type’ leaves clear responsibility on the end-user to competently assess the use of the shed for type, quantity and combination fo substances being stored, and to provide a suitable site with correctly utilised signage.

Easy to transport

Shed panels are flat packed and strapped to a palletised slab for easy forklift handling. Slab weight is 700kg. 3.02 x 2.27m shed is supplied with two bunded slabs. Pack size is 2.1m by either 3.1m or 2.3m (depending on shed size).

Easy to install

Pre-assembled panels are easily installed by bolting to the precast concrete floor for secure anchorage. Wall vents are factory fitted and roof vent simply attaches to a framed hole in the roof on site. Detailed instructions and fittings are supplied.

The end-user is responsible to complete the plumbing of the drains to the requirements of the site – no fittings external to the slab are supplied.

Aviaries

Flat Aviaries

Wall height: 1.83m

Doors

  • These are 1.2m high – ½ mesh and ½ sheeting to match dado under all mesh sections. There are two tube inserts in each side of the door to give effective bracing without obstructing viewing. All doors are fitted with a padbolt and an extra safety catch for use when inside the aviary.

Dividers

  • These can be used to divide an aviary into any number of compartments and the doors can be in the divider or outside walls to give required access. They normally match the end walls for sheet, mesh and dado.

Heavy duty parrot mesh available.

  • Supplied in 5 pre assembled panels
  • The following options are available:
    • Various combinations of steel and mesh to suit your personal requirements
    • Hinged hatch
    • Mesh in roof
    • Mesh to ground
    • Full height doors
    • Rotating feeders so you don’t have to enter the cage to feed
    • Coloured trim
  • Bird proofing is supplied with all aviaries and is used to seal the gap between the top of the wall and the sheeting
  • Install yourself or we can install for you
flat-aviary

Gable Aviaries

Wall height: 1.83m
  • 625mm steel skirt made from Bluescope steel sheeting, 0.4mm thick
  • Garden Master sources galvanised 12.5 x 12.5 x 1.2mm mesh. If you have a parrot our 25 x 25 x 2mm heavy-duty mesh may be what you need, ask our helpful staff when ordering.
  • Doors are 1.2m high and have a padbolt and extra latch for internal locking when in the enclosure.
  • Manufactured from Bluescope galvanised “J” Channel
  • Aviaries with length smaller than or equal to 3.76 will be supplied in 6 pre-assembled panels
  • Lengths greater than 3.76  will be supplied in 10 pre-assembled panels and 2 heavy duty ridge beams and a prefabricated welded truss.
  • Bird proofing is supplied with all aviaries and is used to seal the gap between the top of the wall and the sheeting.
  • Made in South Australia
  • We use steel rivets for the main frame and large flange aluminium rivets for the attachment of mesh
  • Assembly kits are supplied with class 4, 10 gauge tech screws, instructions and gloves.
  • Doors have square hollow section steel installed to provide additional strength.
  • Large format gable aviaries enables unrestricted flying ,giving your birds a happy and healthy environment.
  • Dividers available as per flat aviary description.
  • The following options are available:
    • Hinged hatch
    • Various combinations of steel and mesh to suit your personal requirements
    • Mesh in roof sections
    • Mesh to ground
    • Full height doors
    • Rotating feeders so you don’t have to enter the cage to feed.
    • Coloured trim
  • Install yourself or we can install for you
aviary-gable-main

Hexagonal Aviary

Popular style that complements any setting for attractive display of your birds or other pets. Picture on the right shows a 1.55m size with optional coloured trim and mesh.

Features

  • Hexagonal aviary is supplied in 6 pre-assembled panels and a two piece roof
  • 0.4mm thick Australian BlueScope Colorbond Steel
  • Mesh is galvanised 12.5 x 12.5 x 1.2
  • Wall height 1.83m
  • Supplied , with class 4, 10 gauge tech screws, instructions and gloves.
  • 1.2m door with square hollow section steel installed to provide additional strength for the hinges
  • Manufactured in Edwardstown
  • Install yourself or we can install for you
  • The following options are available:
    • Various combinations of steel and mesh to suit your personal requirements
    • Hinged hatch
    • Mesh to ground
    • Full height doors
    • Rotating feeders so you don’t have to enter the cage to feed
    • Coloured trim
gm-aviary-hexx
hex-size

Square Aviary

Door height: 1.2m, wall height: 1.58m, Floor size: 0.78m x 0.78m

Choose from two appealing aviary designs. Floor tray fits both styles and comes in zinc only.

  • Options include:
    • Hinged hatch
    • Coloured trim
    • Rotating feeders so you don’t have to enter the cage to feed
gm-aviary-box

Flight Aviary

Door height: 1.56m, wall height: 1.83m
Give your birds plenty of space to stretch their wings in our new Flight Aviary.

Mesh from top to bottom provides unrestricted view for both you and your animals.
Designed with a ledge along front for easy placement of perches. Simply rest your perch on the ledge and back wall of aviary – no need for fixings! Also, the 200mm high step deters animals from running out the door.

  • Dado can be added if required
  • Reverse options to suit your yard
  • Door is full height
  • Customizable
  • Install yourself or we can do it for you
  • The following options are available:
      • Various combinations of steel and mesh to suit your personal requirements
      • Hinged hatch
      • Mesh in roof
      • Mesh to ground
      • Full height doors
      • Rotating feeders so you don’t have to enter the cage to feed
      • Coloured trim
      • Heavy duty parrot mesh
flight-aviary-m
Chicken Enclosures

Flat Roof

  • BlueScope steel
  • Galvanised 12.5 x 12.5 x 1.2 thick wire
  • Galvanised “J” Channel and 0.4mm thick sheeting
  • Solid sheeted door
  • Wire panels have a 625mm sheet skirt for structural strength and protection from cats etc at ground level
  • Main structure is riveted with steel rivets with large flange aluminium rivets to attach the mesh
  • Supplied in 5 pre-assembled panels from our SA factory for easy assembly on site. (wire mesh fitted)
  • Square steel inserted provides a strong door
  • Roof can be sloped for water to flow forward or back during installation
  • Easy adapted for use as fowl houses, catteries or kennels etc.
  • Available in Zinc or Colorbond
  • Door position customisable
  • Various combinations of steel and mesh available

Options:

  • Internal and External Nesting Boxes
  • Dividers
  • Extra Doors
  • Hinged Hatch
chook-flatroof

Gable Roof

  • Available in Zinc or Colour with galvanised channel and trim.
  • Supplied in 6 pre-assembled panels (all wire mesh is fitted) from our SA factory for easy assembly on site.
  • Standard layout – wire in front panel only. This allows aviary to be positioned to protect the birds from prevailing wind.
  • Additional wire sections available.
  • Wire panels have a 625mm sheet skirt for structural strength and protection from cats etc at ground level.
  • Easy adapted for use as fowl houses, catteries, kennels etc.
  • Availability of the door in the gable end if required for the larger sizes.
  • Our SA made acerwall colour sheeting is 0.4mm thick
  • Heavy gauge ridge beam.
  • Dividers and extra doors available
  • Hinged hatch available
  • Internal or external nesting boxes available
  • Various combination of steel and mesh configurations available
  • Coloured trim/channel is an optional extra
  • Door position is customizable
chook-gableroof

Chook Palace

Pitched Roof

  • 30 degree pitch allows plenty of air movement, reducing the risk of overheating during the summer months.

Termite resistant

  • Steel construction keeps the coop mite-free, protecting your chickens and their home.

Adaptable

  • The Chook Palace is also suitable for housing racing pigeons with the addition of a gating system

Dual nesting areas

  • Includes two externally accessible nesting boxes. Water sits underneath the nesting shelf, keeping water clean and reducing the chance of contamination

Options available:

  • Hinged hatch
  • Various combinations of steel and mesh configurations
  • Timber floors
  • Coloured trim
  • Door position is customisable
  • Available in zinc or colorbond with galvanised trim/channel
chookpalace-m
Cat & Other Small Animal Enclosures

A-Frame Aviary

Door height: 1.2m
  • A-Frame aviary is supplied in 4 pre-assembled panels, centre support internal hinged door to enable cleaning
  • 0.4mm thick Australian BlueScope Colorbond Steel (also available in zinc)
  • Mesh is galvanised 12.5 x 12.5 x 1.2
  • Supplied , with class 4, 10 gauge tech screws, instructions and gloves.
  • 1.2m door with square hollow section steel installed to provide additional strength for the hinges
  • Manufactured in Edwardstown
  • Install yourself
  • Handles at both ends to easily move around the yard.
gm-smallpetenclosure

Small Pet Enclosure

Wall height: 1.2m
Strong and hygienic design for small animals inlcuding cats, dogs, aviary birds, rabbits, guinea pigs, hens and other poultry.
  • Our SA made Acerwall colour sheeting is 0.4mm thick.
  • Supplied in 5 pre-assembled panels from our SA factory for easy assembly on site.
  • Compact size of the flat roof suits restricted areas and backyards where space is at a premium.
  • Roof can be sloped for water to flow forward or back during installation.
  • Unobtrusive style of the flat roof is ideal for situations where minimal visual impact is required.
  • Supplied with class 4, 10 gauge tech screws, instructions and gloves.
  • Doors have square hollow section steel installed to provide additional strength.
  • Customisable info

Options:

  • Fully customisable, add extra mesh sections or add more full sheet sections
  • Door position customisable
  • Reverse positions to suit your yard
  • Powder coated trim
  • Powder coated mesh
gm-smallpet-enclosure

Cat Runs

  • Green shadecloth bottom 
  • Mounting clips and pincers included
  • Some assembly will be required 
  • 25 x 25 Mesh Galvanised 
  • Easy to install 
  • Ground runners available
catruns-main
Shade & Hot Houses

Shadehouses

Protect your plants from the elements!

Our horticulture-grade shade cloth has a 50% sunblock factor to provide a cool environment, while maintaining moisture and reducing weeds and insects. It is fade resistant, UV stabilised and reinforced at the edges to resist fraying and tearing.

Green 50% shadecloth is standard with every shadehouse, however other colours are also available. Please contact us if other colours or sunblock factors are required.

  • BlueScope steel
  • Flat roof shade houses supplies as 5 pre assembled panels
  • Gable roof shade houses up to 3.76m long are supplied as 6 pre – assembled panels, larger shade houses are supplied as 10 pre – assembled panels and a galvanised truss.
  • Doors have square hollow tube inserts to provide additional strength
  • Door position is customisable
  • Custom sizes available
  • Colour trim available
  • Tiered plant stands to suit available
  • Made in our South Australian factory
gm-shadehouse

Hothouses

An attractive and economic alternative to the traditional glasshouse

Maintains the correct environment for your plants. Natural Solarweave allows light but very little air transfer. 2 blade louvre vent each end allows control of atmosphere.

  • BlueScope
  • Flat roof Hot houses supplies as 5 pre assembled panels
  • Gable roof Hot houses up to 3.76m long are supplied as 6 pre – assembled panels, larger shade houses are supplied as 10 pre – assembled panels and a galvanised truss.
  • Doors have square hollow tube inserts to provide additional strength
  • Door position is customisable
  • Custom sizes available
  • Colour trim available
  • Tiered plant stands to suit available
  • Made in our South Australian factory
gm-hothouse

Tiered Plant Stands

Heavy duty galvanised, suitable for plant display

Sturdy construction, made in Australia from quality materials. 20mm x 20mm galvanised SHS, 70mm x 50mm x 4mm thick galvanised mesh, 300mm deep shelves in either 1.44m or 2.19m lengths.

Custom sizes available. Available in single, 2 tier and 3 tier.

gm-tiered-stand
Boxed Products

Boxed Shed2Go™ Gable Roof

Simple, quick and easy storage with a gable style
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • Double doors in all sizes except the 2.27m x 2.27m
  • BlueScope steel
  • The same Garden Master quality, but assemble it yourself
    and save!
  • All doors in the front panel.
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.

Boxed Shed2Go™ Economaster

Economical and compact storage solution
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • The same Garden Master quality but assemble it yourself and save!
  • BlueScope steel
  • Flat roof can be sloped to front or back during assembly
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.

Boxed Shed2Go™ Federation

The charm of yesteryear with the ease of tomorrow
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • Traditional garden master quality but assemble yourself and save!
  • BlueScope steel
  • Heritage roof has 30 degree pitch, overhanging eaves, barges and finials
  • Choose your colour trim, Tuscan red, Caulfield green or classic cream, other colours available at an extra cost.
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.
  • 2.27m size has a single door
  • 3.02m size has a double door

Boxed Shed2Go™ HD Quickstore

Gable roof with heavy duty steel frame for extra strength
All Shed2Go™ products are unassembled and boxed ready for shipping

Features:

  • BlueScope steel
  • 50mm x 50mm posts and 38mm x 25mm purlins – galvanised inside and out
  • Concealed brackets give a clean finish, making lining easy.
  • Doors include welded braces and keyed door lock
  • Truss supplied with 4.5 and 6m lengths
  • Double doors on front panel
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt.

Boxed Shed2Go™ Pet Shelters

Aviaries, Chicken Enclosure and Animal Enclosure
All Shed2Go™ products are unassembled and boxed ready for shipping

Strong and hygienic design for small animals including cats, dogs, aviary birds, rabbits, hens and other poultry.

Flat Roof

Features:

  • Traditional Garden Master quality, but assemble it yourself
    and save!
  • Galvanised mesh 12.5mm x 12.5mm x 1.2mm thick
  • Doors can be installed either end
  • Roof can be sloped to front or back
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt
  • Supplied in boxed form, easy to transport and
    assemble.

Options (available on some models)

  • Heavy duty galvanised mesh (25mm x 25mm x 2mm) to suit parrots

Gable Roof

Features:

  • Traditional Garden Master quality, but assemble it yourself
    and save!
  • Galvanised mesh 12.5mm x 12.5mm x 1.2mm thick
  • Doors can be installed either end
  • Available in Zinc, Monument, Woodland Grey, Classic Cream, Paperbark and Pale Eucalypt
  • Supplied in boxed form, easy to transport and
    assemble.

Options (available on some models)

  • Heavy duty galvanised mesh (25mm x 25mm x 2mm) to suit parrots
Verandahs

Garden Master also produces quality verandas in Australian Colorbond Steel

Extend your home’s outdoor living area and enjoy Australia’s fantastic climate with a Garden Master Veranda. Add a practical and stylish veranda to your home to achieve the alfresco lifestyle we all enjoy whilst adding value to your home. Our Steel verandas are designed to withstand the Australian climate and won’t rot or warp as can happen with timber. Call us today to discuss your requirements

Gable Verandah

Protect your plants from the elements!

Coming Soon

Flat Roof Verandah

An attractive and economic alternative to the traditional verandah

Coming Soon

flatroofverandah

See additional Options

If you don’t know what you need, send us a message or give us a call

Ordering Specifications
Options
Cladding

• Zinc trim is standard except in Federation, Tool Shed and Cave models. Zinc trim can be upgraded to colour in other models.
• Roof overhangs plan dimensions up to 300m. Please refer to dealer if this is critical.


Message

Contact us for a free quote